Cisco

CCNA 200-301

(ITP-200-301.AA1) / ISBN : 978-1-61691-528-5
Lab
Get A Free Trial

Skills You’ll Get

The Cisco CCNA certification validates a candidate's knowledge and skills required to install, configure, and operate a small to medium-sized network. This certification provides foundational knowledge in the essentials of networking, security, and automation. The CCNA 200-301 exam is for all support technicians involved in the installation, operation, and verification of Cisco networks.
Download Course Outline

1

Foundational Networking Technologies

  • New Job I
  • Subnetting and Addressing I
  • Subnetting and Addressing II
  • Subnetting and Addressing III
  • IP Addressing and Configuration I
  • IP Addressing and Configuration II
  • Rebuild a Configuration
  • SSH and Telnet
  • Router CLI Exec Mode I
  • Router CLI Exec Mode II
  • Router CLI Configuration Process
  • Interface Status V
  • Interface Status VI
  • Loopback Interfaces
  • Configuring SSH
  • Setting Router Passwords
  • IPv4 Addressing Troubleshooting
  • Path Analysis IV
2

IPV4 Addressing

  • IP and MAC Address Comparisons
  • Configuring Router IP Settings
  • IP Address Configuration I
  • IP Address Configuration II
  • IP Address Configuration III
  • IP Address Configuration IV
  • IP Address Configuration V
  • IP Address Configuration VI
  • IP Address Configuration VII
  • Subnet Zero I
  • Subnet Zero II
  • Subnet Zero III
  • Subnet ID Calculation I
  • Subnet ID Calculation II
  • Subnet ID Calculation III
  • Subnet ID Calculation IV
  • Subnet ID Calculation IX
  • Subnet ID Calculation V
  • Subnet ID Calculation VI
  • Subnet ID Calculation VII
  • Subnet ID Calculation VIII
  • Subnet ID Calculation X
  • Subnet ID Calculation XI
  • IP Address Rejection I
  • IP Address Rejection II
  • IP Address Rejection III
  • IP Address Rejection IV
  • IP Address Rejection IX
  • IP Address Rejection V
  • IP Address Rejection VI
  • IP Address Rejection VII
  • IP Address Rejection VIII
  • IP Address Rejection X
  • IP Address Rejection XI
  • IP Route Selection I
  • IP Route Selection II
  • IP Route Selection III
  • IP Route Selection IV
  • IP Route Selection IX
  • IP Route Selection V
  • IP Route Selection VI
  • IP Route Selection VII
  • IP Route Selection VIII
  • IP Route Selection X
  • IP VLSM Route Selection I
  • IP VLSM Route Selection II
  • IP VLSM Route Selection III
  • IP VLSM Route Selection IV
  • IP VLSM Route Selection V
  • IP VLSM Route Selection VI
  • IP VLSM Route Selection VII
  • VLSM Overlap I
  • VLSM Overlap II
  • VLSM Overlap III
  • VLSM Overlap IV
  • VLSM Overlap V
  • VLSM Overlap VI
  • VLSM Overlap VII
  • VLSM Overlap VIII
  • VLSM Overlap IX
  • VLSM Overlap X
  • VLSM Overlap XI
3

IPv6 Addressing

  • IPv6 Configuration I
  • IPv6 Configuration II
  • IPv6 Address Configuration I
  • IPv6 Address Configuration II
  • IPv6 Address Configuration III
  • IPv6 Address Configuration IV
  • IPv6 Address Configuration V
  • IPv6 Address Configuration VI
  • IPv6 Address Configuration VII
  • IPv6 Address Configuration VIII
  • IPv6 Address Configuration IX
  • IPv6 Subnet ID Calculation I
  • IPv6 Subnet ID Calculation II
  • IPv6 Subnet ID Calculation III
  • IPv6 Subnet ID Calculation IV
  • IPv6 Subnet ID Calculation IX
  • IPv6 Subnet ID Calculation V
  • IPv6 Subnet ID Calculation VI
  • IPv6 Subnet ID Calculation VII
  • IPv6 Subnet ID Calculation VIII
  • IPv6 Subnet ID Calculation X
  • IPv6 Route Selection I
  • IPv6 Route Selection II
  • IPv6 Route Selection III
  • IPv6 Route Selection IV
  • IPv6 Route Selection IX
  • IPv6 Route Selection V
  • IPv6 Route Selection VI
  • IPv6 Route Selection VII
  • IPv6 Route Selection VIII
  • IPv6 Route Selection X
  • IPv6 EUI-64 Calculation Drills I
  • IPv6 EUI-64 Calculation Drills II
  • IPv6 EUI-64 Calculation Drills III
  • IPv6 EUI-64 Calculation Drills IV
  • IPv6 EUI-64 Calculation Drills V
  • IPv6 EUI-64 Calculation Drills VI
  • IPv6 EUI-64 Calculation Drills VII
  • IPv6 EUI-64 Calculation Drills VIII
  • IPv6 EUI-64 Calculation Drills IX
  • IPv6 EUI-64 Calculation Drills X
  • IPv6 Addressing Troubleshooting
  • IPv6 Routing
4

Ethernet Switching

  • Switch Interfaces and Forwarding
  • Switch IP Connectivity
  • Switch CLI Exec Mode
  • Switch CLI Configuration Process I
  • Switch CLI Configuration Process II
  • Testing Using Pings with Hostnames
  • Comparing Configuration Files
  • Configuring Hostnames
  • Interface Status I
  • Interface Status II
  • Interface Status III
  • Interface Status IV
  • Switch Forwarding I
  • Configuring Local Usernames
  • Terminal History I
  • Terminal History II
  • Switch IP Address
  • Switch IP Connectivity I
  • Configuring Switch IP Settings
  • Setting Switch Passwords
  • Interface Settings I
  • Interface Settings II
  • Interface Settings III
  • Cisco Discovery Protocol (CDP) Configuration I
  • Cisco Discovery Protocol (CDP) Configuration II
  • Link Layer Discovery Protocol (LLDP) Configuration I
  • Link Layer Discovery Protocol (LLDP) Configuration II
  • Network Discovery I
  • Network Discovery II
  • Configuring VLANs
  • VLAN Configuration I
  • VLAN Configuration II
  • VLAN Configuration III
  • VLAN Configuration IV
  • VLAN Configuration V
  • VLAN Configuration VI
  • VLAN Configuration VII
  • Topology Analysis
  • Switch Forwarding Troubleshooting
  • Path Analysis I
  • VLAN Troubleshooting
  • Path Analysis II
  • Router-on-a-Stick to MLS I
  • Router-on-a-Stick to MLS II
  • VLAN Trunking I
  • VLAN Trunking II
  • Router-on-a-Stick Configuration I
  • Router-on-a-Stick Configuration II
  • Router-on-a-Stick Configuration III
  • Router-on-a-Stick Verification I
  • Router-on-a-Stick Verification II
  • MLS Configuration I
  • MLS Configuration II
  • MLS Configuration III
  • MLS IPv6 Configuration I
  • MLS IPv6 Configuration II
  • Trunking Configuration I
  • Trunking Configuration II
  • Trunking Configuration III
  • Trunking Configuration IV
  • Switch Security I
  • STP Analysis
  • STP Configuration
  • STP Prediction Drills I
  • STP Prediction Drills II
  • STP Prediction Drills III
  • STP Prediction Drills IV
  • PortFast Configuration I
  • PortFast Configuration II
  • BPDU Guard Configuration I
  • BPDU Guard Configuration II
  • STP Configuration I
  • STP Configuration II
  • Path Analysis III
  • STP Troubleshooting
  • Path Troubleshooting I
  • Static EtherChannel
  • Dynamic EtherChannel I
  • Dynamic EtherChannel II
5

Routing

  • Using and Suspending Telnet Connections
  • Ping
  • Traceroute I
  • Traceroute II
  • Traceroute III
  • PC IP Commands I
  • PC IP Commands II
  • PC IP Commands III
  • Static Routing I
  • Static Routing II
  • Configuring Default Routes
  • Static Routes I
  • Static Routes II
  • Static Routes III
  • Static Routes IV
  • Default Route I
  • Default Route II
  • OSPF Configuration I
  • OSPF Configuration II
  • OSPF Configuration III
  • OSPF Metric Manipulation
  • Interpreting the show ip route output
  • Connected Routes
  • OSPF Router ID I
  • OSPF Router ID II
  • OSPF Metric Tuning I
  • OSPF Metric Tuning II
  • OSPF Metric Tuning III
  • OSPF Neighbors I
  • OSPF Neighbors II
  • OSPF Neighbors III
  • OSPF Neighbors IV
  • OSPF Neighbors V
  • OSPF Interface Configuration I
  • OSPF Interface Configuration II
  • IP Addressing and Routing
  • Path Troubleshooting II
  • IP Routing
  • OSPF Troubleshooting I
6

Wireless Networks

  • Configuring a Wireless LAN Controller (WLC) I
  • Configuring a Wireless LAN Controller (WLC) II
  • Logging into a Wireless LAN Controller (WLC)
  • Wireless LAN Controller (WLC) RADIUS server configuration I
  • Wireless LAN Controller (WLC) RADIUS server configuration II
  • Wireless LAN Controller (WLC) dynamic interface configuration I
  • Wireless LAN Controller (WLC) dynamic interface configuration II
  • Wireless LAN Controller (WLC) WLAN configuration I
  • Wireless LAN Controller (WLC) WLAN configuration II
  • Wireless LAN Controller (WLC) WLAN security configuration I
  • Wireless LAN Controller (WLC) WLAN security configuration II
  • Monitoring a Wireless LAN Controller (WLC) I
  • Monitoring a Wireless LAN Controller (WLC) II
7

Network Services

  • Configuring NAT I
  • Configuring NAT II
  • Configuring NAT III
  • NAT Configuration I
  • NAT Configuration II
  • NAT Configuration III
  • NAT Configuration IV
  • NAT Configuration V
  • NAT Configuration VI
  • NAT Configuration VII
  • NTP Configuration I
  • NTP Configuration II
  • NTP Configuration III
  • Terminal Monitor
  • Booting a New Router IOS
  • Migrating to a New IOS Image
  • IOS Verification
8

Network Security

  • Securing VTY lines with an ACL I
  • Securing VTY lines with an ACL II
  • Securing VTY lines with an ACL III
  • Securing VTY lines with an ACL IV
  • Disabling HTTP/HTTPS access
  • Configuring a login banner
  • Configuring a MOTD banner
  • Configuring an EXEC banner
  • Switch hardening configuration I
  • Switch hardening configuration II
  • Standard ACL
  • Extended ACL I
  • Extended ACL II
  • ACL I
  • ACL II
  • ACL III
  • ACL IV
  • ACL V
  • ACL VI
  • ACL Analysis I
  • Named ACL I
  • Named ACL II
  • Named ACL III
  • Configuring Switch Security I
  • Configuring Switch Security II
  • DHCP snooping
  • Dynamic ARP inspection
  • Switch Security II
  • Switch Security III
  • Switch Security IV
  • Port security auto-recovery I
  • Port security auto-recovery II
  • DHCP snooping configuration I
  • DHCP snooping configuration II
  • DHCP snooping verification I
  • Dynamic ARP inspection configuration I
  • Dynamic ARP inspection configuration II
  • Dynamic ARP inspection verification I
  • Dynamic ARP inspection verification II
  • Path Troubleshooting III
  • Port Security
9

Network Programmability

  • Setting the Configuration Register
  • Ignoring the Startup-config File

Any questions?
Check out the FAQs

Still have unanswered questions and need to get in touch?

Contact Us Now

There is no formal requirements for taking the new exam. However, these are the recommendations from Cisco:

  • have an understanding of all exam topics
  • one or more years of experience with computer networking and Cisco equipment
  • good grasps of network fundamentals

USD 300

Pearson VUE

  • Simulations
  • Drag and drop
  • Multiple-choice single answer
  • Multiple-choice multiple answers

The exam contains 120 questions.

120 minutes

825

The policies for retaking exams are as follows:

  • Candidates who fail an Associate, Professional, or Specialist exam must wait a period of five (5) calendar days, beginning the day after the failed attempt, before they may retest for the same exam.
  • Candidates who fail any Cisco Certified Internetwork Experts (CCIE) certification or Cisco Certified Design Expert (CCDE) written exam must wait for a period of 15 calendar days, beginning the day after the failed attempt, before retaking the same exam.
  • Once passed, a candidate must wait a minimum of 180 days before taking the same exam with an identical exam number.
  • Candidates who violate these policies are in violation of the agreement. Such conduct is strictly prohibited as described in the Cisco certification and confidentiality agreement.

Know more about the 200-301

Related Courses

All Courses