200-301-SIMULATOR-VOL2.AB2
CCNA 200-301 SIMULATOR, Volume 2
Expert Self-paced · 1 year access
78 Hands-On LiveLabs
Practice real IT tasks in guided environments.
- Real environments
- Auto-graded
- No installation
01 / Lessons & labs
See exactly what you will learn and practice
Lessons
24 Interactive Lessons01 Fundamentals of Wireless Networks +
02 Analyzing Cisco Wireless Architectures +
03 Securing Wireless Networks +
04 Building a Wireless LAN 13 LiveLab +
13 LiveLab in this lesson — see the labs panel →
05 Introduction to TCP/IP Transport and Applications +
06 Basic IPv4 Access Control Lists 1 LiveLab +
1 LiveLab in this lesson — see the labs panel →
07 Named and Extended IP ACLs 12 LiveLab +
12 LiveLab in this lesson — see the labs panel →
08 Applied IP ACLs +
09 Security Architectures +
10 Securing Network Devices 10 LiveLab +
10 LiveLab in this lesson — see the labs panel →
11 Implementing Switch Port Security 9 LiveLab +
9 LiveLab in this lesson — see the labs panel →
12 DHCP Snooping and ARP Inspection 9 LiveLab +
9 LiveLab in this lesson — see the labs panel →
13 Device Management Protocols 10 LiveLab +
10 LiveLab in this lesson — see the labs panel →
14 Network Address Translation 10 LiveLab +
10 LiveLab in this lesson — see the labs panel →
15 Quality of Service (QoS) +
16 First Hop Redundancy Protocols +
17 SNMP, FTP, and TFTP 4 LiveLab +
4 LiveLab in this lesson — see the labs panel →
18 LAN Architecture +
19 WAN Architecture +
20 Cloud Architecture +
21 Introduction to Controller-Based Networking +
22 Cisco Software-Defined Access (Cisco SD-Access) +
23 Understanding REST and JSON +
24 Understanding Ansible and Terraform +
Hands-On Labs Our edge
78 LiveLabs- Configuring a Wireless LAN Controller (WLC) I
- Configuring a Wireless LAN Controller (WLC) II
- Logging into a Wireless LAN Controller (WLC)
- Wireless LAN Controller (WLC) RADIUS server configuration I
- Wireless LAN Controller (WLC) RADIUS server configuration II
- Wireless LAN Controller (WLC) dynamic interface configuration I
- Wireless LAN Controller (WLC) dynamic interface configuration II
- Wireless LAN Controller (WLC) WLAN configuration I
- Wireless LAN Controller (WLC) WLAN configuration II
- Wireless LAN Controller (WLC) WLAN security configuration I
- Wireless LAN Controller (WLC) WLAN security configuration II
- Monitoring a Wireless LAN Controller (WLC) I
- Monitoring a Wireless LAN Controller (WLC) II
- Standard ACL
- Extended ACL I
- Extended ACL II
- ACL I
- ACL II
- ACL III
- ACL IV
- ACL V
- ACL VI
- ACL Analysis I
- Named ACL I
- Named ACL II
- Named ACL III
- Securing VTY lines with an ACL I
- Securing VTY lines with an ACL II
- Securing VTY lines with an ACL III
- Securing VTY lines with an ACL IV
- Disabling HTTP/HTTPS access
- Configuring a login banner
- Configuring a MOTD banner
- Configuring an EXEC banner
- Switch hardening configuration I
- Switch hardening configuration II
- Configuring Switch Security I
- Configuring Switch Security II
- Switch Security II
- Switch Security III
- Switch Security IV
- Port security auto-recovery I
- Port security auto-recovery II
- Path Troubleshooting III
- Port Security
- DHCP snooping
- Dynamic ARP inspection
- DHCP snooping configuration I
- DHCP snooping configuration II
- DHCP snooping verification I
- Dynamic ARP inspection configuration I
- Dynamic ARP inspection configuration II
- Dynamic ARP inspection verification I
- Dynamic ARP inspection verification II
- Terminal Monitor
- Cisco Discovery Protocol (CDP) Configuration I
- Cisco Discovery Protocol (CDP) Configuration II
- Link Layer Discovery Protocol (LLDP) Configuration I
- Link Layer Discovery Protocol (LLDP) Configuration II
- NTP Configuration I
- NTP Configuration II
- NTP Configuration III
- Network Discovery I
- Network Discovery II
- Configuring NAT I
- Configuring NAT II
- Configuring NAT III
- NAT Configuration I
- NAT Configuration II
- NAT Configuration III
- NAT Configuration IV
- NAT Configuration V
- NAT Configuration VI
- NAT Configuration VII
- Booting a New Router IOS
- Setting the Configuration Register
- Ignoring the Startup-config File
- Migrating to a New IOS Image
Labs run in your browser — nothing to install.
Prepare for CCNA 200-301 SIMULATOR, Volume 2
One-time payment. Full access for 1 year. Start with a free trial if you want to look around first.
- 1 year of full access
- 78 LiveLab included
- Certificate of completion
No credit card required